Line Boring

The Pro-Line 50 has been developed specifically for drilling two lines of holes in one operation at a 32mm pitch. With its capability for quick and easy change over and its wide field of application, this machine offers the greatest versatility for line drilling. The Pro-Line 50 also has the capability of producing chip-free through boring.

• Row of holes as well as line drilling in the SYSTEM 32mm
• 50 (2 x 25) holes in one drilling cycle
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Furniture connector and hinge drilling (option)
• Optional 3rd drilling unit

The Vantage 76 or 152 NC is a programmable single or dual 76 spindle (152 total) drill for fast production of system line holes. Once initiated the Vantage will automatically drill up to 4 lines of holes.

Fast cycle time of approx. 6 seconds for 2 lines and approx. 14 seconds for 3 or 4 lines of holes.

After the boring units move to the program position, the work piece is loaded and positioned against the rear fence and registered on either the left or right and end stop.

• Row of holes as well as line drilling in the SYSTEM 32mm
• 76 or 152 (2 x 76) holes in one drilling cycle
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Line drilling machine for high capacity